How to reset service light after oil change?
Dec 12, 2010 at 3:13 AM
reset maintenance light?
2011 TOYOTA TACOMA
JOE HART
- MEMBER
- 1 POST
- FOLLOW
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
ENGINE OIL CHANGE REMINDER LIGHT RESET - PROCEDURE 4
1. To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer showing ODOMETER READING. Turn ignition switch to ON position while holding down trip meter RESET button.
2. Hold trip meter RESET button down for at least 5 seconds until odometer indicates "000000" and MAINT reminder light goes out.
Engine Oil Reset Procedure
1. Turn the engine switch OFF with the odometer reading shown.
2. Turn the engine switch to the ON position while holding down the trip meter reset button.
3. Continue to press and hold the button until the odometer displays 000000.
If the system fails to reset, the light will continue flashing.
1. To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer showing ODOMETER READING. Turn ignition switch to ON position while holding down trip meter RESET button.
2. Hold trip meter RESET button down for at least 5 seconds until odometer indicates "000000" and MAINT reminder light goes out.
Engine Oil Reset Procedure
1. Turn the engine switch OFF with the odometer reading shown.
2. Turn the engine switch to the ON position while holding down the trip meter reset button.
3. Continue to press and hold the button until the odometer displays 000000.
If the system fails to reset, the light will continue flashing.
Dec 12, 2010 at 6:46 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.