What is code B 1041

Tiny
PRAGOSH
  • MEMBER
  • 2011 SUZUKI SWIFT
  • 1.5L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 145,264 MILES
We replaced the two air bag two seat belt detecting sensor and control module. After that programmed by diagonal sing tool, but detecting the this code (B 1041). First we detect three fault means B 1017 B 1157 and B 1041. After second diagnose first two code disappear and third one remaining and airbag light show in cluster board.
Do you
have the same problem?
Yes
No
Tuesday, January 28th, 2014 AT 12:52 AM

2 Replies

Tiny
KNOWLEDGE IS POWER
  • EXPERT
That code is high resistance in the air bag circuit. id recommend disconnecting the battery negative and wait for 15 mins for the airbag to loose its battery backup power. Then remove the airbag and steering wheel to replace the clock spring which is common to go out.

Here are guides to help with diagrams below to show you on your car.

https://www.2carpros.com/articles/steering-wheel-clock-spring-removal

and

https://youtu.be/gnSGfEqrf_w

Check out the diagrams (Below). Please let us know what you find. We are interested to see what it is.
Was this
answer
helpful?
Yes
No
+4
Tuesday, January 28th, 2014 AT 4:11 AM
Tiny
BUNNYM
  • MEMBER
Thanks for this post I had to get a new clock spring cost me $143.00 all fixed. I love this site.
Was this
answer
helpful?
Yes
No
Thursday, September 5th, 2019 AT 5:04 PM

Please login or register to post a reply.

Sponsored links