Remove the glove box assembly:
Remove both the console rear screw covers, then remove the rear screws (A), then remove the console assembly. See Fig. 1
Open the glove box door, remove the upper and lower glove box assembly screws (A). See Fig. 2.
Then remove gloce box.
Remove the right hand console side finisher.
Disengage the filter cover tab (1) to remove the filter cover.
Remove the in-cabin microfilter from the blower unit by using the pull-tab on the bottom of the filter.
To install, reverse removal procedure.
Monday, January 7th, 2019 AT 9:00 PM