Car shakes violently to 20 mph then stops

Tiny
JUSTINF2001
  • MEMBER
  • 2010 NISSAN ALTIMA
  • 2.5L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 160,000 MILES
It only does this while in gear. Replaced motor mounts didn’t fix it. Could the CV axles of wheel bearing cause this?
Tuesday, March 24th, 2020 AT 10:47 AM

2 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Hi,

Yes, an axle or joint can cause it, but I would think you would hear noise when making turns such as a clicking. Also, I would feel you would notice it at any speed. Take a look through this link Here is one that deals and see if anything mirrors what you experience and let me know:

https://www.2carpros.com/articles/symptoms-of-a-bad-cv-axle-joint

Here are a couple links dealing with CV joints/axles in general.

https://www.2carpros.com/articles/how-a-cv-joint-works

https://www.2carpros.com/articles/replace-cv-axle

________________

Is there any growling noises or noticeable sounds related that may indicate a wheel bearing? Also, do you feel it more in the steering wheel or the floor of the vehicle?

Let me know.
Joe
Was this
answer
helpful?
Yes
No
Tuesday, March 24th, 2020 AT 11:10 AM
Tiny
TOUGHDIVER
  • MECHANIC
  • 224 POSTS
Hi,

It could be a broken belt in one or more tires or excessive wheel run-out this can be hard see and will also smooth out with higher speed have the tire and wheel checked for run-out and balance by a certified tire expert. I'm attaching repair guide below let us know if you need more information.

https://www.2carpros.com/articles/steering-wheel-shakes-when-accelerating-or-braking
Was this
answer
helpful?
Yes
No
Tuesday, March 24th, 2020 AT 11:39 AM

Please login or register to post a reply.

Sponsored links