BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Car overheated had heads reconditioned and when.
2008 TOYOTA SIENNA
Car overheated had heads reconditioned and when we assembled the head gasket will not crush, followed torqueing specs, runs good when you add water it flowed into the heads
Tuesday, November 13th, 2012 AT 9:57 PM
What do you mean by it will not crush?
If water is getting to the head, you could have a cracked head. Was it pressure tested?
Wednesday, November 14th, 2012 AT 12:08 PM
to post a reply.
Related Cylinder Head Gasket Content
I Did A Valve Job On My 1999 Toyota Sienna, I Set The Rr E Cam 2 Dots To 2 Dots I Cam But Cam Pulley Is Off 180 Degry Can You Please Tell...
Blown Head Gasket Test
Got a blown head gasket? We are a team of ASE certified mechanics that have created this guide to help you check to see if your car's engine has a head gasket that is blown...
Starting A Toyota Sienna
I Have A 1999 Toyota Sienna 3.0 Engine I Replace The Cylinder Head And I Took Out All The Fuel And Oil After I Put Back The Cylinder Head...
I Need Some Help With This Smoke
Toyota 1999 Sienna, 93k, Burnt Valve In #2 Hole, Fixed The Valve Started Burning Oil On The Whole Bank, 2, 4, 6. Had New Valve Seals Put...
2008 Toyota Sienna Starter ?
This Car Has It's 3rd. Starter, Will Not Start When Hot Must Wait For Cool Off, Then Might Start Or Might Need To Be Tapped With A Wrench...
99 Toyota Sienna Van / Rear 02 Sensor
I Found 02 Sensor In Rear Of Exhaust But The Wires Go Up Into The Floor And It Seems Like There Is No Acsess Can Anyone Help Me With This? :
Ask a Car Question. It's Free!
Coolant Mixing with Oil
How to gather codes Ford Explorer
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.