Why a high RPM but now power when accelerator depressed after battery replacement?

JASONMSNYDER

MEMBER
2008 TOYOTA RAV4
60,000 MILES

The battery was replaced and started fine but when went to drive there was no acceleration. The 4x44 check engine and vcs light are on. Parts store ran the codes and said 2 sensors came up. They reset then but didn't help.

Sunday, January 8th, 2012 AT 2:36 AM

6 Replies

CJ MEDEVAC

MECHANIC
11,004 POSTS

HAVE YOU DRIVEN THIS ENOUGH FOR IT TO RELEARN IDLE?

EXPLORE OUR HOMEPAGE STUFF ABOUT "RELEARN" YOU MAY BE GETTING EXCITED FOR NOTHIN'! (MIGHT EVEN INSTALL "RELEARN" IN THE SEARCH BOX)

HOPE IT'S THAT EZ!

KEEP US INFORMED, IF I CAN'T ASSIST FURTHER, I WILL FIND SOMEONE WHO CAN

THE MEDIC

SPONSORED LINKS

Was this

answer

helpful?

Yes

Sunday, January 8th, 2012 AT 3:11 AM

CJ MEDEVAC

MECHANIC
11,004 POSTS

OK MISSED THAT---EXACTLY WHAT WERE THE CODE NUMBERS. THE ACTUAL LETTERS AND NUMBERS?

THE MEDIC

Was this

answer

helpful?

Yes

Sunday, January 8th, 2012 AT 3:13 AM

JASONMSNYDER

MEMBER
3 POSTS

I I don't know the exact codes they didn't print them. I took the battery off for an hour reconnected it and let it idle for an hour as I read this may work. After that I tried driving it for about half an hour and it didn't help.

Was this

answer

helpful?

Yes

Tuesday, January 10th, 2012 AT 11:12 PM

CJ MEDEVAC

MECHANIC
11,004 POSTS

I SORTA KEEP FORGETTING ABOUT ALL OF THE NEW STUFF THEY ADD

I USUALLY JUST JUMP ON AND START ANSWERING---HOPIN' TO FIND A CJ IN NEED!

I SORTA DID A LITTLE 2CARPRO SITE SURFING THERE'S LOTS OF STUFF I AIN'T SEEN YET....SEE IF THIS HELPS

https://www.2carpros.com/articles/engine-idles-too-high

THE MEDIC

Was this

answer

helpful?

Yes

Tuesday, January 10th, 2012 AT 11:51 PM

JASONMSNYDER

MEMBER
3 POSTS

Turned out the throttle body fuse blew. It wasn't in the main fuse panel so that's why I couldn't locate it. Since the fuse blew it couldn't progress on the "re-learning" cycle. Thanks for the help and advice though.