THE WINDSHIELD WASHER HOSE FROM THE PUMP ON THE ...

  • Tiny
  • Anonymous
  • 2008 Suzuki SX4
  • 81,000 miles

The windshield washer hose from the pump on the fluid reservior is broken somewhere in the L front wheel well area, and I tried to fish it out by using a hooked wire through a hole in the fender well but the water squirts out from where it is broken. There is a clear tube and a black tube coming from under the reservoir and going behind the headlight. It appears as if the tube to the washer jets was broken off or pulled out by the previous owner. It is a very crowded and difficult to work around the fluid reservoir. I could cut the clear hose, connect it to a new hose, and reroute it. Any suggestions would be greatly appreciated.

Thursday, January 24th, 2013 AT 12:40 AM

1 Reply

  • Tiny
  • saturntech9
  • Expert
  • 29,442 posts

I always just splice in some vacuum line to repair the broken hoses.

Was this
answer
helpful?
Yes
No
Thursday, January 24th, 2013 AT 1:12 AM

Please login or register to post a reply.

Similar Questions