BECOME A MEMBER
It is free to join!
I AGREE TO THE
BECOME A MEMBER
Power Distribution Center Pdc
TRYING TO REPLACE A FUSEABLE LINK. HOW DO I SEPARATE THE FUSE BOX TO PUT IN THE NEW FUSEABLE LINK?
2008 Scion xB
May, 3, 2012 AT 11:43 PM
There are 8 or 9 clips around the fuse box holding it together. Each clip set seems to have 2 clips. I have already unbolted the fuse box from the car.
FOUND 1336 RELATED QUESTIONS
I Need Help Getting My Car Running After
In Need Of An Ignition Pushbutton Modifi
May, 4, 2012 AT 12:04 AM
Carefully one at a time. You will need several small pocket screw drivers to work them up without breaking them.
May, 4, 2012 AT 12:32 AM
Ok, well I got the fuse box separated. Now the problem is actually getting to fuse able link. I cant seem to get enough room under there to get to the link.
May, 4, 2012 AT 12:40 AM
Can you send me a picture
to post a reply.
Fuse Box Or Electrical Problems
Rear left and right turn signal do not flash changed bulbs and still do not work changed fuse ( used the spare fuses already in the f
Relay Panel Under Dash Right Of Steering Column
I remove a small black relay instead of the red one that i needed now i do not know which slot it goes into
Electrical problem 1999 mitsubishi eclipse 4 cyl two wheel drive manual 167000 miles i am working on a 1999 mitsubishi eclipse ha
Something In Your Car Not Working? Test The Fuses Like A Pro
Ask a Car Question. It's Free!
Want To Learn How To Use A Test Light? Here Is How
Air Conditioner Condenser Fan Relay Replace
Need To Learn Use A Voltmeter? Here Is How
Learn How Your Automotive Alternator Works
Need Your Car Relay Tested? Do It Like The Pros
© 1999 - 2015 2CarPros, Inc.