How do you replace brake switch on 2008 Kia.

Tiny
ANONYMOUS
  • MEMBER
  • 2008 KIA SPORTAGE
  • 72,000 MILES
How do you replace brake switch on 2008 KIA Sportage
Saturday, February 9th, 2013 AT 3:03 PM

1 Reply

Tiny
HMAC300
  • EXPERT
BRAKE SWITCH CLEARANCE

Screw in the brake switch until its plunger is fully depressed (threaded end (A) touching the pad (B) on the pedal arm) then adjust the switch 3/4 turn to until clearance between the brake switch connector. Make sure
that the brake lights go off when the pedal is released.

Fig. 7: Checking Clearance
Courtesy of KIA MOTORS AMERICA, INC.
Was this
answer
helpful?
Yes
No
Saturday, February 9th, 2013 AT 4:44 PM

Please login or register to post a reply.

Recommended Guides