I NEED TO CHANGE A LOW BEAM HEADLIGHT BULB ON PASSENGER SIDE, HOW DO I GET TO BULB?

  • Tiny
  • Rick Robbins
  • 2008 Chevrolet Silverado

Low beam headlight went out want to replace.

Friday, November 18th, 2011 AT 4:20 PM

1 Answer

  • Tiny
  • JDL
  • Expert
  • 16,236 posts

My info says you need to remove headlamp assembly. Remove the upper radiator grille. Behind the headlamp at the top of the bumper, access the lower inside hidden headlamp bolt. Loosen the bolt only, do not remove, the lower outside hidden bolt.

Apply masking tape to the front bumper end caps to protect the painted surface. For the right side assembly only, disengage the upper radiator air baffle. Release the headlamp from the support tab, rotate the lamp assembly towards the center of vehicle. Disengage the headlamp electrical connector from the forward headlamp harness.

Was this
answer
helpful?
Yes
No
Friday, November 18th, 2011 AT 5:50 PM

Please login or register to post a reply.

Similar Questions