Crankshaft sensor

Tiny
67EDWARD
  • MEMBER
  • 2009 CHEVROLET HHR
  • 2.2L
  • 4 CYL
  • TURBO
  • 2WD
  • AUTOMATIC
  • 10,000 MILES
I need to find out where the left side of the crankshaft sensor that. I found the right side put one in?
Wednesday, March 5th, 2014 AT 3:58 PM

6 Replies

Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Hello,

The crankshaft sensor is located at the rear of the engine on the left side here is a guide to help walk you through the repair with the location of the sensor for your car below.

https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+2
Wednesday, March 5th, 2014 AT 4:26 PM
Tiny
ELKCO
  • MEMBER
  • 1 POST
  • 2008 CHEVROLET HHR
  • 76,000 MILES
Where is it located at on this engine 2.2, I can't find it
Was this
answer
helpful?
Yes
No
+1
Saturday, November 28th, 2020 AT 4:28 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It's item 4 in pic have you scanned for codes to see if it's bad? Have you check fuel pressure. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
Saturday, November 28th, 2020 AT 4:28 PM (Merged)
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
  • 2008 CHEVROLET HHR
  • 100,000 MILES
How do I replace the crank sensor?
Where is the crank sensor located?
If my car needs to be jump started everyone to turn it on what does that mean?
Was this
answer
helpful?
Yes
No
Saturday, November 28th, 2020 AT 4:28 PM (Merged)
Tiny
RACEFAN966
  • MECHANIC
  • 5,029 POSTS
So the car will start and run if you jump start it? If that is the case then don't replace the sensors that won't fix it. I would go my local parts store and have them check the battery, alternater and starter. Most parts stores can do this and most do it for free to. Get back to me and we will go from there.
Was this
answer
helpful?
Yes
No
-1
Saturday, November 28th, 2020 AT 4:28 PM (Merged)
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
It certainly doesn't mean you need a crank sensor. Try the obvious. Have the battery and charging system tested.
Was this
answer
helpful?
Yes
No
+1
Saturday, November 28th, 2020 AT 4:28 PM (Merged)

Please login or register to post a reply.

Sponsored links