SPONSORED LINKS

2007 Mitsubishi Galant Heating / Electrical

Tiny
STRESSED_14
  • MEMBER
  • 2007 MITSUBISHI GALANT
  • 2.4L
  • 4 CYL
  • AUTOMATIC
Blower Motor Resistor Intermittent. I just had the BMR changed out about a two to three weeks ago and now, the heat car is not heating. Its believed to be electrical now. Any advice or ideas? Also the fan control switch (knob) and the direction control (face, defrost, floor, etc) does not work. They set it to just blow defrost to heat the car once the part was replaced. I'm stuck between a rock and a hard spot.
SPONSORED LINKS
Wednesday, December 10th, 2014 AT 4:41 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,179 POSTS
Do you mean there is no heat or the fan isn't working now? Also, as far as the air flow direction, have you checked for vacuum leaks? The system is actuated by vacuum.
Was this
answer
helpful?
Yes
No
Wednesday, December 10th, 2014 AT 5:11 AM
Tiny
STRESSED_14
  • MEMBER
  • 2 POSTS
The air flow isn't circulating within the car. And I have not. I will do this.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, December 10th, 2014 AT 5:52 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,179 POSTS
If you hear the fan but there is no air flow, check to make sure all vent doors are working. As I mentioned, check for possible vacuum leaks. I just repaired a jeep that only had the defroster working. A simple vacuum hose was worn through.
Was this
answer
helpful?
Yes
No
Wednesday, December 10th, 2014 AT 8:37 AM

Please login or register to post a reply.

Related Blower Fan Resistor Content

VIEW MORE

Sponsored links