When I stop car at set of lights for example the car revs upto 2000rpm and then drops back to normal idling. Is this a throttle regulator valve sticking?
have the same problem?
Monday, January 21st, 2013 AT 2:00 PM
First eliminate all vacuum or air leaks in the system. You may have a bad IAC ( idle air control) but try cleaning the throttle body first. Remove the intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some into the small holes next to the throttle plate. That should help stabilize the idle. If it still has a problem, replace the IAC.
Please consider a donation if we helped you
Monday, January 21st, 2013 AT 2:15 PM
Are they all the rubber tubings? Just blow air through them?