BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I change brake pad front and bake, when the suv.
2007 FORD EXPLORER
I change brake pad front and bake, when the suv sit for 4 hrs or so, I start out and the brakes grind I pump the brakes an about half a block the sound quit. Does this ever time I start out.
Wednesday, October 31st, 2012 AT 10:29 PM
You may have installed higher-quality linings. They are often harder than the originals and that noise is a common side effect until they get warm.
Did you have the rotors machined? If not, the edges of the linings could be riding on a ridge of rust. That will wear off in time.
Wednesday, October 31st, 2012 AT 11:16 PM
to post a reply.
Related Brake Grind Content
When I Hit The Brakes It Makes A Loud Grinding Sound When I Come To A Stop The Car Jumps Foward And Then When I Take Off Again It Jumps
Sarah Michele Hatchell
2000 Ford Explorer Brakes
Brakes Problem 2000 Ford Explorer 6 Cyl Four Wheel Drive Automatic 145, 00 Miles Okay When I Break My Car Break Good But, It Make...
2004 Ford Explorer Problem Installing New Brake Pads
Brakes Problem 2004 Ford Explorer 6 Cyl Four Wheel Drive Automatic 63000 Miles I'm Putting New Brake Pads On Our Truck, After I...
Brake Pressure Switch Location
I Cant Find Were The Brake Pressure Switch Is Location On A 07 Ford Explorer It Is Not On The Master Cylinder. It Wont Shift Out Of Park...
2000 Ford Explorer No Brake Pedal - Goes To The Floor
Brakes Problem 2000 Ford Explorer 6 Cyl Four Wheel Drive Automatic 130000 Miles I Replaced Both Front Calibers And Pads Because One Of...
Ask a Car Question. It's Free!
How to Fix a Brake Pull
How to Bleed and Flush Your Vehicle Brakes
Bleed and Flush
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.