This job is not too bad here is a guide to help you see what you are in for when doing the job.
Install the thermostat (305).
Install the O-ring seal (304) and water outlet housing (303).
Notice: Refer to Fastener Notice.
Install the water outlet housing bolts (302).
Tighten the bolts to 15 N.m (11 lb ft)
The thermostat for your car is the water pump check out the diagrams BELOW to see what I am talking about.
Check out the diagrams (Below)
Please let us know if you need anything else to get the problem fixed.
Images (Click to enlarge)
Friday, June 22nd, 2012 AT 7:26 PM