Unclip the 3 clips to get the top cover loose. Unplug the mass air flow sensor as well since the harness can limit how far you can lify the cover up. Remove air filter inside and install new one. When installing, make sure the 3 guide sleeves at the back line up and go all the way in. The middle one is the toughest. I usually use a medium pry bar and pry on it while pushing the cover in gently just to get it to slide in. Once in, reconnect the mass air flow sensor and clip down the 3 clips.
Sunday, January 2nd, 2011 AT 8:39 PM