SPONSORED LINKS

Dont know what to do next

Tiny
ROB77518
  • MEMBER
  • 2006 SUZUKI VERONA
  • 56,000 MILES
I have changed my coil packs out and my spark plugs out done a compression test and my oygen sensor and still my check engine comes on and still brings up same codes and runs like crap when it comes on ive read on a couple sites where the same problems have happened but not sure what the do next I mean I dunno
SPONSORED LINKS
Sunday, October 2nd, 2011 AT 10:35 PM

7 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
What codes has it been coming up with?
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 11:07 PM
Tiny
ROB77518
  • MEMBER
  • 9 POSTS
I just said for the coil packs the oxygen sensor which is p0305 and p0302 and p0150
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 11:35 PM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Check to make sure the coil(s) for cylinders 2 and 5 are getting power and firing signals. Make sure the connectors are making good contact and that wires aren't frayed or excessively worn.
Was this
answer
helpful?
Yes
No
Monday, October 3rd, 2011 AT 3:31 AM
Tiny
ROB77518
  • MEMBER
  • 9 POSTS
Yep I have done that already to all of em are firin and makin contact
Was this
answer
helpful?
Yes
No
Monday, October 3rd, 2011 AT 7:44 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
What is the coil input voltage?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, October 3rd, 2011 AT 7:51 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
You might also try running a can or bottle of high quality fuel system cleaner to make sure the injectors are spraying properly.
Was this
answer
helpful?
Yes
No
Monday, October 3rd, 2011 AT 8:01 AM
Tiny
GARYMOOYOUNG
  • MEMBER
  • 2 POSTS
Check new coil packs you put in. It is easy to bend one of the 3 pins.
Was this
answer
helpful?
Yes
No
Monday, October 15th, 2012 AT 4:03 AM

Please login or register to post a reply.

Related Ignition Coil Replace/Remove Content

Sponsored links