Disconnect battery, remove nut that holds ground by starter remove bolts and electrical connectors from starter. The starter is under the intake manifold near the bell housing.
Here is a guide to help you see what you are in for when doing the job.
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Tighten: Tighten the starter solenoid terminal-to-battery cable terminal nut to 12 Nm (106 in. lbs.) , and the starter solenoid terminal-to-ignition solenoid terminal nut to 6 Nm (53 in. lbs.) .
Tighten the starter lower mounting stud ground wire nut to 12 Nm (106 in. lbs.) .
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Cheers
Images (Click to make bigger)
Tuesday, June 24th, 2014 AT 6:08 AM