SPONSORED LINKS

2006 Proton Gen-2 Power windows

Tiny
TREYSIERRA
  • MEMBER
  • 2006 PROTON GEN-2
  • 1.4L
  • 4 CYL
  • 2WD
  • MANUAL
  • 190,000 MILES
I'm trying to fix my Proton Gen.2 so I can register it again. It's been out of rego for 6mnths.

Engine and Battery have been replaced and I new to fix windows.

Drivers window is fine, I think my brother changed or removed the connector plug bit inside the door, and now it works fine. But other 3 are having problems.

One window winds down but won't go back up easily, sometimes it does slowly after a lot of effort and patience. The other 2 don't budge at all.

Also the back passenger door won't open.

How should I go about fixing them?
Thankyou
SPONSORED LINKS
Saturday, July 4th, 2015 AT 9:45 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
For the windows, the switches seems to be faulty (most probably the main switch at driver door) and one or more motor could be bad. You can test them individually by applying direct current to the motors, of course you would need to remove the door trims to test.

Back passenger door could be faulty due to a bad outer handle coupled with the child lock being activated or the door latch is bad. Removing the door trim could be difficult.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 8th, 2015 AT 10:05 AM

Please login or register to post a reply.

Sponsored links