ABS

  • Tiny
  • skinman
  • 2006 Peugeot 407
  • 100 miles

I have got to change my o/s/f abs sensor on my pug 407 I see by new one I got its held in by allen key, any advise welcome

Do you
have the same problem?
Yes
No
Thursday, August 2nd, 2012 AT 5:08 PM

8 Replies

  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

What is the problem you are having?

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 6:04 PM
  • Tiny
  • skinman
  • Member

Got abs light on and esp put me dianostic on and it showed o/s/f abs sensor faulty

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 6:22 PM
  • Tiny
  • skinman
  • Member

Got new sensor today seems a allen key bolt holds it in

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 6:49 PM
  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

So what is the problem if it is bolted on by the allen key? Just remove the allen key and pull the sensor out.

The scan tool tells you something is wrong with the circuit and it might not be a bad sensor. You need to test it.

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 8:13 PM
  • Tiny
  • skinman
  • Member

Did have it tested and is faulty, I try tomoz to unbolt and remove it, thanks

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 8:15 PM
  • Tiny
  • skinman
  • Member

Also didnt know if you have to take any off parts b 4 u can get sensor off

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 8:19 PM
  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

Our database does not have any information on this vehicle but generally there is nothing much you need to remove.

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 8:45 PM
  • Tiny
  • skinman
  • Member

Well I give it a try, thanks for time and info

Was this
answer
helpful?
Yes
No
Thursday, August 2nd, 2012 AT 8:47 PM

Please login or register to post a reply.

Similar Questions