2006 Mitsubishi Lancer Car Will Not Start

Tiny
JOANNAROJAS712
  • MEMBER
  • 2006 MITSUBISHI LANCER
  • 136,000 MILES
My car stopped on the freeway and would not start, so I changed the timing belt on my car, the original belt had damage on it but the car did not start with a new belt, I then replaced the head and noticed that the old one had some damage as well, and it still will not start.
Monday, June 3rd, 2013 AT 1:36 PM

4 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Did you get the timing belt installed correctly?

https://www.2carpros.com/articles/car-cranks-but-wont-start

The link above explains how to go about checking for source of the problem.
Was this
answer
helpful?
Yes
No
Tuesday, April 20th, 2021 AT 11:40 AM
Tiny
JOANNAROJAS712
  • MEMBER
  • 3 POSTS
Yes, all the fuses are good and the battery is good
Was this
answer
helpful?
Yes
No
Tuesday, April 20th, 2021 AT 11:40 AM
Tiny
JOANNAROJAS712
  • MEMBER
  • 3 POSTS
The scanner tool says, "†P0340 - Camshaft Position Sensor Circuit Malfunction
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 20th, 2021 AT 11:40 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Check the camshaft sensor wiring. Ensure it is correctly plugged in. If that fails, try another sensor.
Was this
answer
helpful?
Yes
No
Tuesday, April 20th, 2021 AT 11:40 AM

Please login or register to post a reply.

Sponsored links