2006 Mazda 6 Oil pump replacement

Tiny
VIDECO
  • MEMBER
  • 2006 MAZDA 6
  • 3.0L
  • V6
  • FWD
  • MANUAL
  • 148,000 MILES
My Mazda is noisy (mechanical clank) during start-up after it sets a few hours or more - the oil pressure light stays on for about 2 seconds - then everything is fine. If I let the car set for less time, it starts up with no oil pressure light and no noise.

I am pretty sure that the pump should be replaced - what should I expect for cost?
Tuesday, May 6th, 2014 AT 10:47 AM

5 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,128 POSTS
What weight oil are you using? Are you using a anti flow back oil filter?
Was this
answer
helpful?
Yes
No
Tuesday, May 6th, 2014 AT 11:03 AM
Tiny
VIDECO
  • MEMBER
  • 3 POSTS
Using what the manufacturer recommends (5W-20 I believe) and yes, it is an anti flow-back filter.
Was this
answer
helpful?
Yes
No
Tuesday, May 6th, 2014 AT 11:28 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,128 POSTS
I have to be honest, I don't know if a new pump will take care of the issue. However, I would expect the pump to be around 100.00 and labor to take nearly 8 hours. Please confirm that the oil filter has the anti-flow back valve. If by chance it doesn't, it could be taking the pump a few seconds to refill the filter before oil gets to the engine.
Was this
answer
helpful?
Yes
No
Wednesday, May 7th, 2014 AT 5:41 AM
Tiny
VIDECO
  • MEMBER
  • 3 POSTS
OK - thanks for your help
Was this
answer
helpful?
Yes
No
Wednesday, May 7th, 2014 AT 9:24 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,128 POSTS
Glad to help. Let me know if you have other questions.

Joe
Was this
answer
helpful?
Yes
No
Wednesday, May 7th, 2014 AT 9:45 AM

Please login or register to post a reply.

Sponsored links