Headlights

Tiny
MDOERSAM
  • MEMBER
  • 2006 MAZDA 6
Change front headlight mazda 6
Do you
have the same problem?
Yes
No
Wednesday, December 1st, 2010 AT 2:22 PM

1 Reply

Tiny
KHLOW2008
  • EXPERT
REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION. )
3. Remove in the order indicated in the table. Fig 07.
4. Install in the reverse order of removal.

FRONT BUMPER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table. Fig 22.
3. Disconnect the front side maker light connector.
4. Disconnect the front fog light connector. (Vehicles with front fog lights)
5. Install in the reverse order of removal.

FRONT BUMPER REMOVAL NOTE
1. Pull the front bumper ends (wheel arch) outward to disengage from the bumper slider.

CAUTION:
If only one side of the front bumper is disengaged from the bumper slider and the bumper falls, it could be damaged. When disengaging the front bumper from the slider, secure the bumper so that it does not fall.

2. Remove the front bumper from the body.

FRONT BUMPER INSTALLATION NOTE
1. Spread the front bumper ends (wheel arches) apart.
2. Attach the front bumper to the body.
3. Press the front bumper connecting area into the body to engage with the bumper slider.
Was this
answer
helpful?
Yes
No
-1
Wednesday, December 1st, 2010 AT 3:33 PM

Please login or register to post a reply.

Recommended Guides