Why does not work the power steering?

Tiny
DRESTUARDOFUENTESF
  • MEMBER
  • 2006 MAZDA 5
  • 56,000 MILES
Had wheel bearing replace now the abs light is on
his did not fix the problem so he replaced the bearing on the other side the noise stoped but now the power steering does not work and the engine, power steering, brake, and ABS lights are all on. What is wrong? Thanks in advance!
Do you
have the same problem?
Yes
No
Tuesday, October 16th, 2012 AT 12:55 AM

6 Replies

Tiny
ASEMASTER6371
  • EXPERT
Something went wrong with the repair. The abs sensor may have been damaged. Have him re check his work

Roy
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 12:58 AM
Tiny
DRESTUARDOFUENTESF
  • MEMBER
But what's is The relation with The power steering?
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 1:35 AM
Tiny
ASEMASTER6371
  • EXPERT
Have you checked the fluid for the power steering?

Is the belt there and functioning?

There may be no relation to the power steering as we cannot see anything here, we are going on your information. Did you return to the shop for a follow up?

Roy
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 1:40 AM
Tiny
DRESTUARDOFUENTESF
  • MEMBER
Thanks, but i'm in Guatemala city, Central América.
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 2:13 AM
Tiny
ASEMASTER6371
  • EXPERT
Ok, where did you have the repairs done?

Roy
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 2:15 AM
Tiny
DRESTUARDOFUENTESF
  • MEMBER
Have a question? Is posible this problem, because I used a non-original bearing and replace it. Then The problem appear.
Was this
answer
helpful?
Yes
No
Tuesday, October 16th, 2012 AT 2:18 AM

Please login or register to post a reply.

Recommended Guides