What is the torque spec for the crank pulley bolt?
Aug 7, 2011 at 12:17 AM
torque for crank pully bolt
2006 KIA SORENTO
KARAOKEDEB
- MEMBER
- 3 POSTS
- FOLLOW
Advertisement
Hello,
The front crank bolt is torqued to 133-140 Ft Lb or 180-190 Nm. HEre is a video that shows how to use a torque wrench correctly.
https://youtu.be/juOClONIWeY
Please let us know if you need anything else to get the problem fixed.
The front crank bolt is torqued to 133-140 Ft Lb or 180-190 Nm. HEre is a video that shows how to use a torque wrench correctly.
https://youtu.be/juOClONIWeY
Please let us know if you need anything else to get the problem fixed.
Aug 7, 2011 at 1:41 AM
I had my timing belt changed in my 2004 Sorento in 2008, should the Dealer have changed the lower pulley bolt when this was done?
Jan 15, 2019 at 5:51 PM
(Merged)
Hi there,
This is not normally replaced with this job.
Mark (mhpautos)
This is not normally replaced with this job.
Mark (mhpautos)
Jan 15, 2019 at 5:51 PM
(Merged)
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.