Torque for crank pully bolt

Tiny
KARAOKEDEB
  • MEMBER
  • 2006 KIA SORENTO
  • 6 CYL
  • 80,000 MILES
What is the torque spec for the crank pulley bolt?
Do you
have the same problem?
Yes
No
Sunday, August 7th, 2011 AT 12:17 AM

3 Replies

Tiny
MHPAUTOS
  • EXPERT
Hello,

The front crank bolt is torqued to 133-140 Ft Lb or 180-190 Nm. HEre is a video that shows how to use a torque wrench correctly.

https://youtu.be/juOClONIWeY

Please let us know if you need anything else to get the problem fixed.

Was this
answer
helpful?
Yes
No
+12
Sunday, August 7th, 2011 AT 1:41 AM
Tiny
RDBROWNCST
  • MEMBER
  • 2004 KIA SORENTO
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 88,000 MILES
I had my timing belt changed in my 2004 Sorento in 2008, should the Dealer have changed the lower pulley bolt when this was done?
Was this
answer
helpful?
Yes
No
Tuesday, January 15th, 2019 AT 5:51 PM (Merged)
Tiny
MHPAUTOS
  • EXPERT
Hi there,

This is not normally replaced with this job.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Tuesday, January 15th, 2019 AT 5:51 PM (Merged)

Please login or register to post a reply.

Recommended Guides