2006 Isuzu i350 ECM/pcm

Tiny
PDJENKINS
  • MEMBER
  • 2006 ISUZU I350
  • 3.5L
  • 5 CYL
  • 4WD
  • AUTOMATIC
  • 162,000 MILES
My truck cuts off while I'm driving, and sometimes won't start and a reduced power message is displayed in the dash. I had Autozone and Advance put the reader on it and got a P0601 code for internal memory error. I was advised to replace the ecm by one and replace the pcm by the other. Are they talking about the same part, and is the dealership the only place to flash and do the relearn process?
Do you
have the same problem?
Yes
No
Monday, September 7th, 2015 AT 1:05 PM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
P0601 is the read only memeory of pcm they are talking about the same thing. Any garage with a scanner can install a pcm and reprogram it. They can put a rebuilt one in as well. It needs to be reprogrammed due to security issues. Dont' go to an auto parts and they say it's all set because it won't start.
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 7:12 AM
Tiny
PDJENKINS
  • MEMBER
  • 4 POSTS
Thanks. There is a $250 difference between the Autozone price and the Chevrolet price. Which would you buy?
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 11:56 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Autozone is probably a rebuilt which should be ok if you have the gm part number check gmpartsdirect. Com they will be cheaper than a dealer as well.
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 12:03 PM
Tiny
PDJENKINS
  • MEMBER
  • 4 POSTS
Thanks a lot!
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 12:05 PM

Please login or register to post a reply.

Sponsored links