Keeps dying and running rough

Tiny
PABEAR321
  • MEMBER
  • 2006 FORD F-150
  • 11,500 MILES
Just replaced battery last night she left out of town now keeps dying and running rough does the codes need reset? Or any ideal was running fine last night
Wednesday, December 7th, 2011 AT 4:24 AM

7 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Did you ever have the alternator tested?
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 4:27 AM
Tiny
PABEAR321
  • MEMBER
  • 5 POSTS
The batterie was six years old and was going out of town just replaed it. We have had no trouble with the truck just knew it was get cold didn't want stranded
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 4:48 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
I would make sure the battery cables are clean and tight and have the alternator tested.I always test the alternator when I change a battery better to be safe then sorry. Also habe it scanned for codes before checking for loose dirty battery cables. Also if it ran fine before the battery change you may have to remove the battery cable for a few mins then out it back on to see how it runs. Let me know what you find.
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 6:39 PM
Tiny
PABEAR321
  • MEMBER
  • 5 POSTS
It always happens when your not close.I'm in Houston and she is in Bryan Tx. She is going by after class to have Alt checked and coded that way might know where to start I will let you know as I find out Thanks
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 6:50 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Keep me posted.
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 7:05 PM
Tiny
PABEAR321
  • MEMBER
  • 5 POSTS
Well got her truck home it coded 506. When they replace battery didn't clean th glaze off the post. I cleaned it up re attached cables started fine and check engine light went out and idles smoothly Thanks
Was this
answer
helpful?
Yes
No
Saturday, December 10th, 2011 AT 9:06 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Your welcome thats what were here for glad to hear you got it all fixed.
Was this
answer
helpful?
Yes
No
Saturday, December 10th, 2011 AT 11:03 PM

Please login or register to post a reply.

Sponsored links