2006 Ford Bantam gearbox

Tiny
SELDA
  • MEMBER
  • 2006 FORD BANTAM
  • 89,000 MILES
Theres a knocking sound in the gearbox when I start the engine and put it in gear to go or reverse, is this a serious problem? There where never a problem before and just started a few days ago also I checked the brakefluid leves to make sure its right, please can you just give me a indication whats wrong so it could be fixed
Friday, November 8th, 2013 AT 1:09 AM

3 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Manual or auto transmission? But regardless the noise is something that should be look at ASAP as it may be a pre cursor to a more serious problem.
Was this
answer
helpful?
Yes
No
+1
Tuesday, November 12th, 2013 AT 3:08 AM
Tiny
SELDA
  • MEMBER
  • 2 POSTS
Hi Thanks for your reply, yesterday the sound was completely gone and today it's back and I listen carefully, it's only when I put it in first gear and release the clutch slowly there's a click soft knocking sound also if I have to reverse, only happens when you begin to drive stop and drive again only one sound when to put it into gear, it's a manual gearbox many thanks I will wait for your feedback
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 10:13 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
You may have a worn uni, these will click as power is taken up.
Was this
answer
helpful?
Yes
No
Tuesday, November 12th, 2013 AT 3:36 PM

Please login or register to post a reply.

Related Transmission Reverse Content