BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Installed timing belt unable ti get car started.
2006 CHRYSLER SEBRING
Installed timing belt unable ti get car started all timing marks alined
Wednesday, January 9th, 2013 AT 1:31 AM
Did you put engine no.1 piston on its compression stroke/TDC if not this is your problem
Wednesday, January 9th, 2013 AT 1:33 AM
to post a reply.
Related Timing Belt Replace/Remove Content
2006 Chrysler Sebring Timing Belt Issue.
Recently While Heading To Work The Sebring Sputtered And Shut Down Everything. I Am Right Now Doing The Repairs To The Engine Because Of...
Step by Step Timing Belt Replacement Guide
Instructual repair video
Changed Timing Belt Now When I Stop Yhe Car It Dies
Timing Belt Broke It Had Two Big Marks And Two Small Marks On Cogs. I Put The Two Big Marks Together And Car Wouldn't Start So I Put Two...
Not Firing After Replace Timing Belt
Changed Coil Pack Twice, Repositioned Timing To The Tee, Checked For Continuity And Checked For Vacuum Leaks
How Do I Confirm If Timing Belt Was Changed Or Need...
Power Windows Malfunctions Often, How To Fix I Bought It Few Months Back And Owner Told Me About The Change Being Done Around 90k...
2003 Chrysler Sebring Re-assembly After Timing Belt...
Long Story Short, I Replaced The Water Pump And Timing Belt On My Car Using A Haynes Manual. Unfortunately I Didn't Take Before Pictures...
Ask a Car Question. It's Free!
How to fix an engine not starting
Engine Will Not Start
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.