I JUST INSTALLED A RE-MANUFACTURED ENGINE in my.

Tiny
ANONYMOUS
  • 2006 CHRYSLER 300
  • 89,000 MILES

I JUST INSTALLED A RE-MANUFACTURED ENGINE in my 2006 Chrysler 300 base 2.7L.
everything went well, but it is still running rough.
It is putting out 2 codes 1. PO201-"injector circuit malfunction cylinder #1" and PO303- "cylinder #3 misfire detected". So far, I have replaced the fuel injector and the coil on number 1. Also, When I have the engine running at idle and pull connection wire to the coil, the rpm's drop, like they should. When I put the connection back on, rpm's increase, like it
should

Saturday, November 17th, 2012 AT 2:49 AM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Still running rough? Please explain

look for vacuum leaks for the missfire.

What did you do for the injector issue?

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, November 17th, 2012 AT 3:24 AM

Please login or register to post a reply.

Related Fuel Injector Replace/Remove Questions

Help us by donating