BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
All I have is third gear
2005 SUZUKI FORENZA
All I have is third gear everything else works, tried new ECM didn't work. Scanner says not receiving info.
have the same problem?
Monday, April 30th, 2012 AT 10:52 PM
Possible TCM issue. Have you checked all fuses?
Monday, April 30th, 2012 AT 10:55 PM
Yes checked fuses, where is the TCM
Monday, April 30th, 2012 AT 10:58 PM
Run a scan and check for any transmission faults, ensure that they go into the transmission menu and not a general scan as this may not pick up trans codes.
Tuesday, May 1st, 2012 AT 10:34 AM
to post a reply.
Related Engine Computer Code Content
I'm Getting A Code Of P0705 We Cleared The Contacts On...
I'm Getting A Code Of P0705 We Cleared The Contacts On The Tr Sensor We Also Checked The Voltage On The Wires. To No Avail The Car Would...
Code Gathering Incomplete P1000
Easy step by step guide on how to repair an automotive code gathering incomplete P1000 trouble code, this information pertains to most OBDII systems.
2006 Suzuki Forenza Tune Up Needed?
Can You Suggest What Should Be Done. Never Had A Tune Up, Etc. Just Oil Changes And Wiper Motor Was Replaced. No Apparent Problems....
2006 Suzuki Forenza 05 Vs 06 Suzuki Forenza Engines
I Recently Took My 2006 Suzuki Forenza Into A Shop To Get The Engine Replaced They Put A 2005 Engine In Instead And Then Acted Surprised...
2007 Suzuki Forenza Car Engine Oil
My Car Was Low On Oil. No Oil Light Came On But Was Making A Noise. I Put Oil In But The Noise Is Still There. I Put In Two Quarts. Could...
2007 Suzuki Forenza Car Engine
I Went In This Morning To Get An Oil Change Thinking That Was The Problem. But When I Got There They Said That They Could Not Change The Oil...
Ask a Car Question. It's Free!
Spark Plug Toyota Tundra V8 4.7L 2000-2006
Engine Oil Change and Filter Mercedes Benz
Oil Change and Filter Replacement Toyota
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.