2005 Nissan Sentra ABS Wheel Speed Sensor Removal

Tiny
PETERS33
  • MEMBER
  • 2005 NISSAN SENTRA
  • 2.5L
  • 4 CYL
  • 2WD
  • MANUAL
  • 33,000 MILES
The ABS light came on. I pulled the codes. They indicated an open right front wheel sensor. I verified the sensor was open with an ohm meter. I removed the bolt from the sensor. I have soaked it with PB Blaster, taped it with a hammer, twisted with a pliers, and the sensor will not move. I assume it is rusted in place. Any suggestions on how to get it out?
Do you
have the same problem?
Yes
No
Sunday, May 31st, 2015 AT 6:12 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • EXPERT
That's a tough one. The only thing I can think if is a product I started using made by CRC. It's call freeze off. You should be able to find it in most parts stores. Based on my experience, it has worked much better than things I've used in the past such as PB Blaster, which is a good product too. Other than that, all you can do is keep working it.
Was this
answer
helpful?
Yes
No
Sunday, May 31st, 2015 AT 7:54 PM

Please login or register to post a reply.

Recommended Guides