1 Remove cover on left below instrument panel
2 Disconnect connector for evaporator temperature sensor (B10/6x1)
3 Pull evaporator temperature sensor (B10/6) out of A/C housing (1)
4 Install in opposite order.
August, 3, 2011 AT 9:14 PM
Would you please expound on step 1 in order to get to the sensor. Please also mention which cover on the left needs to be removed.
August, 4, 2011 AT 2:35 AM
The cover on the left means the soundproof panel under the drivers side dash. Attaching picture. It should be component #10 once you remove the cover you should see the climate box and sensor should be visible according to the instructions. Good luck to you and I hope this helps.