You need to retrieve the trouble code to find out what is causing it.
As to non starting, are you able to crank without starting or it does not crank at all?
February, 10, 2013 AT 4:06 PM
I'm so sorry. I couldn't ripply u. Because I wasn't home.
Please forgive me & help me.
Thank u so much for your kindness.
Yes I can crank.
I attached name plate photos
I appreciate your help.
February, 10, 2013 AT 8:22 PM
You need to check the engine compression, battery and starter. If cranking speed is low, it might not be easy to start. Check the glow plugs as well.
February, 11, 2013 AT 3:46 PM
I took the glow plug out, and checked them individually.
I connected its to 24V. It took 10 s to heat.
Cranking speed is normal. Can I check compression by using
February, 11, 2013 AT 11:56 PM
I removed the injectors and cleaned.
February, 12, 2013 AT 4:35 PM
For Diesel engines the compression is rather high so you need appropriate pressure gauge to test.
February, 12, 2013 AT 5:28 PM
Pleas can u tell me what the pressure is.
Some one tell me, the rail pressure is incorrect. Can u tell me the rail pressure also.
February, 12, 2013 AT 7:48 PM
Sorry I do not have the information on your vehicle. If the rail pressure is incorrect, a scan tool should be able to diagnose it.
February, 13, 2013 AT 4:31 AM
I gave it to the auto electricians. But they had no appropriate diagnostic socket. Because this vehicle has many sockets. It has a 3 pin socket, we could able to communicate. But I have no a photo. But we have a doubt abut some data.
ENGINE SPEED 31987rpm ( only IGN-KEY ON)
have u detail of that diagnostic sockets.
February, 14, 2013 AT 1:08 AM
There should be an OBD-II socket somewhere as believe the system used is rather new.