SPONSORED LINKS

I AM GETTING CODE 1301 ON BCM MODULE

  • Tiny
  • blkbot
  • 2005 GMC Jimmy
  • 10,000 miles

I am getting code 1301 on BCM module. And no start after it has been driven for a couple or hours but starts up in the mornings of after it sits for a couple of hours. No security light on or steady. It will start after 10m min relearn. Is it the wireing or the BCM module that is more likely the cause.

SPONSORED LINKS
Do you
have the same problem?
Yes
No
Saturday, March 9th, 2013 AT 10:53 PM

1 Reply

  • Tiny
  • hmac300
  • Expert
  • 44,425 posts

This is low voltage going between circuits and module are not communicating with each other. You really need a pro type scan tool to see what is going on it could be a wiring problem or it cold be something else like shorting out.

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 10th, 2013 AT 3:37 PM

Please login or register to post a reply.

Similar Questions

1998 Gmc C3500 Security Light

Electrical Problem 1998 Gmc C3500 V8 Two Wheel Drive Automatic 165000 Miles Vehicle Will Crank Over But Will Not Start. Security ...
Asked by 3500 GMC ·
1 ANSWER

Help.. :( Security Light Cheyenne 1500 98 S.o.s

Computer Problem 1985 Gmc C1500 V8 Two Wheel Drive Automatic Greetings, I Searched Through Every Website In Spanish And I Have Not ...
Asked by euqara ·
1 ANSWER

Security Light Wont Let Me Start

Switched Motor In A 98 Gmc Yukon The Truck Runs For A Second N Shuts Off How Do I Fix Or Bypass The Problem. Is Their A Way I Tryed To Rest ...
Asked by star420j ·
2 ANSWERS

Wont Crank

My Truck Has Two Alarms On It And It Wont Crank And It Is Flashing And, Battery, And The Security Light Is Flashing.
Asked by slopez551980 ·
1 ANSWER