Speedometer quit working and the ABS and brake lights came on

Tiny
BMITCH11
  • MEMBER
  • 2005 FORD FREESTAR
  • 120,000 MILES
After changing a burned out alternator on a 2005 Freestar the speedometer quit working and the abs and brake lights came on and I cannot reset them. What is the procedure for accomplishing this?
Do you
have the same problem?
Yes
No
Thursday, December 1st, 2011 AT 7:45 PM

3 Replies

Tiny
HMAC300
  • EXPERT
Resetting those lights will require a scan tool. It would be a good idea to check the codes before you clear them out, just in case they come back you can compare

Heres a couple guides for you to read, they might help you figure out whats going on

https://www.2carpros.com/articles/brake-system-warning-light-on

https://www.2carpros.com/articles/abs-warning-light-on-easy-repair-guide

Was this
answer
helpful?
Yes
No
-1
Thursday, December 1st, 2011 AT 8:41 PM
Tiny
MICHELLE TUCKER
  • MEMBER
  • 2005 FORD FREESTAR
  • 190,000 MILES
Put a new alternator on in February, the speedometer will not work and all dash lights are on.
Was this
answer
helpful?
Yes
No
+1
Wednesday, January 23rd, 2019 AT 6:09 PM (Merged)
Tiny
HMAC300
  • EXPERT
Scan for codes it may be a speed sensor and or GEM module. A mechanic will need to scan for GEM module problem.
Was this
answer
helpful?
Yes
No
+1
Wednesday, January 23rd, 2019 AT 6:09 PM (Merged)

Please login or register to post a reply.

Sponsored links