2005 Ford Excape Limited 4X4 brake job

Tiny
JAIMEP
  • MEMBER
  • 2005 FORD ESCAPE
  • 68,000 MILES
I am looking at replacing the rotor and pads front and back on a 2005 Ford Excape Limited automatic 4x4 - would you happen to have a diagram for the front and back along with the correct size sockets needed?

When compressing the caliper do I need to adjust the bleeder valve or just loosen the cap to the master cylinder?
Do you
have the same problem?
Yes
No
Monday, April 23rd, 2012 AT 6:54 PM

3 Replies

Tiny
RASMATAZ
  • MEMBER
Jack it all up on stands-Open one side front and back take a picture of it so you can use it on the other side for reference-When you compress the caliper open the bleeder valve
Was this
answer
helpful?
Yes
No
Monday, April 23rd, 2012 AT 6:58 PM
Tiny
JAIMEP
  • MEMBER
Last time you sent me a link to the ford dealer service manual which was very helpfull - can you do the same?
Was this
answer
helpful?
Yes
No
Tuesday, April 24th, 2012 AT 7:26 PM
Tiny
RASMATAZ
  • MEMBER
This is the best I could do, things are no longer the same in here I'm sorry
Was this
answer
helpful?
Yes
No
Tuesday, April 24th, 2012 AT 7:57 PM

Please login or register to post a reply.

Recommended Guides