turned the key the oil light came on but none of the other lights came on

2005 CHRYSLER SEBRING
136,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
VAPIT
  • MEMBER
  • 1 POST
Came out of the store and went to start the car, when I turned the key the oil light came on but none of the other lights came on like they usually do when you first start the car. The starter doesn't engage or turn over.
Oct 16, 2014 at 4:16 PM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
SQM
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 6,383 POSTS
Hello,

Just so cover the basics, have you tried to jump start the vehicle?
What you are describing could be due to a bad battery.

https://www.2carpros.com/articles/how-to-jump-start-car-battery-using-jumper-cables

If you are able to jump start the vehicle and it runs normal, then the battery is likely bad and will need to be replaced.

https://www.2carpros.com/articles/how-to-replace-a-car-battery

If you are unable to start it and it only makes a clicking noise, then the issue could be a bad starter. As the starter solenoid is getting power (that is what the clicking noise indicates) but it is not engaging the starter motor.

https://www.2carpros.com/articles/how-to-replace-a-starter-motor

If it does not make any noise when try to start it (with a jump), then it could be a faulty ignition switch.
The ignition switch is the electrical component that the lock cylinder attaches to.
That switch can malfunction and trigger a no start. It can also keep the lights from turning on.

I have attached diagrams for your reference.

Please let me know if you have any questions.
Thank you.
Oct 14, 2021 at 8:49 PM