CHECK POWERTRAIN IN CHEVROLET LUMINA S (V6) 2005 MODEL

  • Tiny
  • Abraham2024
  • 2005 Chevrolet Lumina
  • 312,000 miles

I have Lumina s (V6) 2005. Check powertrain sign came on. The computer scan give the following code (camshaft position sensor overadvanced. Etc). Sometimes and when the car is cold and I start it, there is noise coming from the engine side (something stalling like (crrr crack.)). After that the car work but one time did not and I have to crank it again without any noise or problem. When the car is warm, there is no noise and the car starts normal. Please advise what could be the problem

Do you
have the same problem?
Yes
No
Sunday, August 12th, 2012 AT 8:12 AM

5 Replies

  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

Can you post the EXACT trouble code? Different scan tools have different description but the code would be universal.

Was this
answer
helpful?
Yes
No
Sunday, August 12th, 2012 AT 8:17 AM
  • Tiny
  • Abraham2024
  • Member

I am not really sure but it could be P0012 or P0011.

Was this
answer
helpful?
Yes
No
Monday, August 13th, 2012 AT 6:02 AM
  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

I could not find any reference to both codes. You have to be specific and if information are not correct, we would not be able to diagnose the problem correctly.

Was this
answer
helpful?
Yes
No
Monday, August 13th, 2012 AT 12:29 PM
  • Tiny
  • Abraham2024
  • Member

I don't really remember the code but I remember the description which is ("A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2))
I hope this will help. If it is not then I will go back and do the scan again to get the code.
Regrads

Was this
answer
helpful?
Yes
No
Tuesday, August 14th, 2012 AT 8:01 AM
  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

I need the EXACT code.

Was this
answer
helpful?
Yes
No
Tuesday, August 14th, 2012 AT 3:13 PM

Please login or register to post a reply.

Similar Questions