Engine Won't run/start?

Tiny
BOZEPHYR
  • MEMBER
  • 2005 CHEVROLET CAVALIER
  • 2.2L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 150,000 MILES
I have fuel & spark but only 60 psi compression on all 4 cylinders. Its blowing oil thru the PCV into the intake plenum. It fouled the Air Intake Temperature Sensor (replaced). Bad rings? Timing? Both? Also appears to have oil seepage into cylinders.
Thursday, February 26th, 2015 AT 6:20 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It sounds like the timing chain has jumped a tooth are two, if so you will need to replace the timing chain, here are the marks so you can confirm the failure. Check out the images (below). Please upload pictures or videos in your response of the problem so we can see what's going on.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
Friday, February 27th, 2015 AT 7:53 AM

Please login or register to post a reply.

Related Engine Not Running Content

Car Cranking but Not Starting? Try This
VIDEO
Car Cranking but Not Starting? Try This
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE