Location of vent solenoid
Jan 13, 2013 at 8:24 PM
2005 BUICK RENDEZVOUS
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
EVAPORATIVE EMISSION (EVAP) CANISTER VENT SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
Remove the fuel tank.
Disconnect the evaporative emission (EVAP) canister vent solenoid harness connector.
Remove the EVAP vent hose from EVAP canister solenoid.
Bend the EVAP canister vent bracket tab to release the EVAP canister vent solenoid.
Remove the EVAP canister solenoid (2) from the fuel tank.
INSTALLATION PROCEDURE
Slide the EVAP canister vent solenoid (2) on the EVAP canister vent bracket until the solenoid snaps into place.
Connect the EVAP vent hose to the EVAP canister vent solenoid.
Connect the EVAP canister vent solenoid harness connector.
Install the fuel tank.
© 2013 ALLDATA LLC. All rights reserved.
Terms of Use
REMOVAL PROCEDURE
Remove the fuel tank.
Disconnect the evaporative emission (EVAP) canister vent solenoid harness connector.
Remove the EVAP vent hose from EVAP canister solenoid.
Bend the EVAP canister vent bracket tab to release the EVAP canister vent solenoid.
Remove the EVAP canister solenoid (2) from the fuel tank.
INSTALLATION PROCEDURE
Slide the EVAP canister vent solenoid (2) on the EVAP canister vent bracket until the solenoid snaps into place.
Connect the EVAP vent hose to the EVAP canister vent solenoid.
Connect the EVAP canister vent solenoid harness connector.
Install the fuel tank.
© 2013 ALLDATA LLC. All rights reserved.
Terms of Use
Jan 13, 2013 at 8:51 PM
Advertisement