04 VW Beetle why does caution light and abs light come on while sometimes trys to stall.Cleaned cable ends didn't help
Jan 15, 2011 at 1:12 AM
VW beetle
2004 VOLKSWAGEN BEETLE
LARRY
- MEMBER
- 1 POST
- FOLLOW
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
An error has been detected in the system and a scan tool is required to retrieve the trouble codes to proceed with diagnostics and rectification.
Before doing that, check the brake fluid level in master cylinder. Low fluid level would cause the indicators to turn on.
The stalling should be a different problem which should be engine related. It could be a fault with the idling system or the system requires cleaning.
Before doing that, check the brake fluid level in master cylinder. Low fluid level would cause the indicators to turn on.
The stalling should be a different problem which should be engine related. It could be a fault with the idling system or the system requires cleaning.
Jan 15, 2011 at 12:55 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.