2004 Mitsubishi Endeavor in CAB fan

RAZTRUK

MEMBER
2004 MITSUBISHI ENDEAVOR
3.6L
6 CYL
FWD
AUTOMATIC
120,000 MILES

Jumped in my vehicle the other day, turned the a/c on, heard the compressor kick in, went to turn the fan on, and nothing. The a/c is working, as when I drive I get cold air, but no fan. Checking my manual, there is no designated fuse for the fan. Could it be on another circuit? I assume it could only be one of three things, a fuse, the fan switch, or the fan motor. Any ideas?

3 Replies

HMAC300

MECHANIC
48,601 POSTS

There is an A/C module under the dash that controls the blower motor so if the fuses in pic are ok then you will have to get a pro to scan to see if something is wrong with that. There are no relays for the blower. See pic for fuse location. It's possible it cold be the control head where the switch is located but I'd bet either a bad blower motor or module has gone bad.

Image (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Tuesday, July 21st, 2015 AT 6:02 AM

RAZTRUK

MEMBER
2 POSTS

Well I guess I already knew that there was something else that was wrong that a simple fuse change would not fix the problem. It seems every time I use one of these "ask the expert" sites, I get, see a pro. Never had any of them actually "help".

Was this

answer

helpful?

Yes

No

+1

Wednesday, July 22nd, 2015 AT 4:00 AM

HMAC300