On the left side of tranny. What is the bolt for right next to the filler plug.

Tiny
LUCKY1955
  • MEMBER
  • 2004 JEEP
  • 77,000 MILES
Filler plug. Then going to towards the rear, 5there s a bolt there. What is that bolt for. Didnt have wrench to pull fill plug to check oil level, so I pulled that bolt, now cant get it to go back in. Like something droped down. Thanks. Help me
Do you
have the same problem?
Yes
No
Sunday, December 4th, 2011 AT 1:12 AM

9 Replies

Tiny
RIVERMIKERAT
  • EXPERT
I'm guessing manual transmission, but what model do you have? Rubicon, Wrangler, etc?
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 4:33 AM
Tiny
JACOBANDNICKOLAS
  • EXPERT
We need to know if it is a standard or automatic trans.
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 4:35 AM
Tiny
LUCKY1955
  • MEMBER
Its a rubicon aqnd its a standard
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 4:38 AM
Tiny
JACOBANDNICKOLAS
  • EXPERT
Is this what you are looking at?
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 5:11 AM
Tiny
JACOBANDNICKOLAS
  • EXPERT
Here is another pic of the trans. See it?
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 5:25 AM
Tiny
CJ MEDEVAC
  • EXPERT
SEE-UNS HOW YOU PROVIDED SO MUCH INFO--ENGINE SIZE--MODEL AND TYPE TRANNY.....ETC

SORTA HARD TO LOOK FOR STUFF!

MANY MORE SITES THAN THIS

MANY MORE EXPLODED VIEWS THAN THIS....AT OTHER PLACES

THIS IS A RESOURCE FOR PARTS I USE QUITE A BIT

http://www.jeep4x4center.com/jeep-transmission-parts/new-venture-nv3550.htm

IF THIS IS NOT YOU, PLUG IN THE CORRECT INFO

SEND US MORE TO GO ON

THE MEDIC
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 2:10 PM
Tiny
RIVERMIKERAT
  • EXPERT
Were the images we supplied helpful lucky?
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 7:08 PM
Tiny
LUCKY1955
  • MEMBER
No. Got to pull the dam thing out I guess. Thanks
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 11:08 PM
Tiny
RIVERMIKERAT
  • EXPERT
The bolt you're talking about, is the opening in the housing it goes through threaded?
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 11:31 PM

Please login or register to post a reply.

Recommended Guides