I NEED TO REPLACE THE POWER STEERING PULLY AND I...

  • Tiny
  • Anonymous
  • 2004 Ford Taurus
  • 144,000 miles

I need to replace the power steering pully and I would like to know if there are any other years of the taurus or another vehicle that has a compatible pully?

Saturday, December 22nd, 2012 AT 8:30 PM

2 Replies

  • Tiny
  • ASEMaster6371
  • Expert
  • 25,556 posts

Go to a parts store. They are cheap anyway

Roy

Was this
answer
helpful?
Yes
No
Saturday, December 22nd, 2012 AT 8:39 PM
  • Tiny
  • robertdebeaux
  • Member

Having recently removed my power steering pump, I had to remove the pulley. The removal was easy compared to the replacement. The kit to remove/replace the pulley has a 3/8 inch bolt which does not fit in the pulley shaft. Only two threads of the installation bolt would thread, and they kept stripping. Before I could seat the pulley to the proper depth, I went thru 3 soft bolts, and two "8" tensile bolts. You might have to find a different size bolt, and use a large washer and nut to seat the pulley.

Good luck.

Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 8:51 PM

Please login or register to post a reply.

Similar Questions