does the back lights go to the turn switch I have no brake lights no power at back power at pedal
Apr 5, 2015 at 2:13 PM
2004 Ford Ranger Back Lights
2004 FORD RANGER
GHOST1968
- MEMBER
- 2 POSTS
- FOLLOW
Advertisement
The high mount brake lamp is wired a little different than the lower brake lites. The lower brakes lamps are wired through the multifunction switch, the high mount brake lamp isn't. This guide can help us fix it.
https://www.2carpros.com/articles/brake-lights-not-working
If the high mount brake lamp doesn't work, I'd have to check voltage to and from brake switch, also check fuse.
https://www.2carpros.com/articles/brake-lights-not-working
If the high mount brake lamp doesn't work, I'd have to check voltage to and from brake switch, also check fuse.
Image (Click to enlarge)
Jun 2, 2021 at 1:07 PM
the high mount works everything works except the back brakes power to the turn signal switch but I do not have no diagram I was told it was the turn signal
Jun 2, 2021 at 1:07 PM
Your lower brake and turn use the same bulb filament, just not at the same time. In the diagram, the wire color on the right at lamp assembly is voltage for stop and turn.
Image (Click to enlarge)
Jun 2, 2021 at 1:07 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.