Ford ALT

Tiny
WDR
  • MEMBER
  • 2004 FORD F-350
  • V8
  • 4WD
  • AUTOMATIC
  • 55,000 MILES
NEED TO INSTALL NEW ALT IN A FORD F350. THE IDLER PULLEY WILL NOT MOVE, CAN'T GET BELT OFF. IS THERE A TRICK TO IT? ALSO THE ENGINE HAS A HYD PUMP IN THE BELT ROUTING SYSTEM.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Tuesday, December 28th, 2010 AT 2:07 PM

2 Replies

Tiny
ERNEST CLARK
  • EXPERT
You need a 3/8 or 1/2 inch breaker bar (I can't remember but all you have to do is look). And the longer the better.

Insert it directly in the middle of the tensioner pulley and turn clockwise. It will release the tension on the belt.

****NOTE*******
Remember the belt routing. If you have to, make a drawing of it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, December 28th, 2010 AT 2:31 PM
Tiny
JACOBANDNICKOLAS
  • EXPERT
Have you been able to remove the belt / Tensionier
Was this
answer
helpful?
Yes
No
Wednesday, December 29th, 2010 AT 9:56 PM

Please login or register to post a reply.

Related Alternator Replace/Remove Content

Alternator Replacement
VIDEO
Alternator Replacement
Instructional repair video
Alternator Replacement
GUIDE
Alternator Replacement
Got a red battery warning light on? This most likely means the alternator has gone out and needs to be replaced. This is a common problem for most vehicles and you can...
VIEW MORE

Sponsored links