2004 Envoy xuv the rear tail gate

Tiny
LEE05
  • MEMBER
  • 2004 GMC ENVOY
  • 6 CYL
  • AWD
  • AUTOMATIC
  • 141,095 MILES
I have a 2004 GMC envoy XUV. When I mash the pressure switch handle for the tail gate to go down it will not do nothing? The other pressure switch handle that opens the fine. But I can not get the tail gate to release and open? What do I need to get for it or do? Everything back their works fine but that. Thanks Lee please let me known?
Do you
have the same problem?
Yes
No
Tuesday, June 24th, 2014 AT 5:46 AM

3 Replies

Tiny
HMAC300
  • EXPERT
Have a pro scan for codes see if it's a module problem
Was this
answer
helpful?
Yes
No
Tuesday, June 24th, 2014 AT 5:58 AM
Tiny
LEE05
  • MEMBER
So where do I plug the scanner in at and what am I looking for? Thanks Hmac 300. Please let me known? Thanks
Was this
answer
helpful?
Yes
No
Tuesday, June 24th, 2014 AT 6:13 AM
Tiny
HMAC300
  • EXPERT
The scanner plugs in t o the aldl and if you don't have a pro scanner that garages use you won't read a thing. Autoparts scanners can't read module problems other than engine/transmission
Was this
answer
helpful?
Yes
No
Tuesday, June 24th, 2014 AT 6:44 AM

Please login or register to post a reply.

Recommended Guides