Removed the front chunk for the 4WD I need to.

Tiny
ANONYMOUS
  • MEMBER
  • 2004 CHEVROLET TRAILBLAZER
  • 140,000 MILES
Removed the front chunk for the 4wd I need to know how to remove the driveshaft from the transwer case
Saturday, March 16th, 2013 AT 3:57 AM

1 Reply

Tiny
HMAC300
  • EXPERT
Do not have to remove the front crossmember! Unbolt diff end and position up above yolk and between steering gear boot. May have to turn yolk to get clearance. But there is plenty! Hold so free and then slide off the rear joint (cv style) from tcase. Slide the shaft to front of car up along engine towards motor mount to clear trans crossbrace then down and back out
Was this
answer
helpful?
Yes
No
Saturday, March 16th, 2013 AT 3:17 PM

Please login or register to post a reply.

Recommended Guides